Hi,
I would like to know the butane gas solubility in Bitumen (Heavy oil).
The bitumen has the Viscosity of 40,550 mPas and density 970.3 kg/m3.
Operating Condition: The temperature is 19-20 deg cel and pressure is between 0.21 MPa and 0.23 MPa. I also have the Critical properties of bitumen...
Hi,
I would like to know the butane gas solubility in Bitumen.
The bitumen has the Viscosity of 40,550 mPas and density 970.3 kg/m3.
Operating Condition: The temperature is 19-20 deg cel and pressure is between 0.21 MPa and 0.23 MPa.
Would you pls suggest me how can I calculate the solubility...
Dear Lothar:
I have tried according to your instruction; but it shows kind of erroe stating "port may not exist or another process may be using the port". I'm not sure what does than mean.
Chem55
Yes, I have tried PDF995 and it is working great; but i need to convert in eps file. Do you have any idea, what is the best free software to convert AutoCad file to eps or jpg?
Thanks,
Chem55
Dear Lothar:
I don't have problem to get the printout. I export the drawing to eps, and then I open the file by using the adobe illustrator or Ghostview. This eps file, which I open through adobe illustrator ot Ghodtview doesn't show any colour, It is just black and white drawing. Would you...
Dear Exxit:
Would you pls elaborate your answer? I am a new user to AutoCad so may be thats the reason I coundn't get your answer.! One thing I forgot to mention that I am using AutoCad-2004.
Thanks,
Chem55
Hi.!
I need to convert autocad file to eps file. It is a coloured drawing. To do so, I am exporting the autocad file to eps but the converted drawing is colourless. Would you pls suggest me what should I do?
Thanks,
Chem55
Hi:
I have about 376 gallon(1421 lt) of water in a open cylindrical tank. I would like to use 6kw of heater and I want to increase 20 deg cel temperature. As per the formula,
Kw = [gallons * T(rise)] / [325*Time(hrs)]
I have calculated that it will take about 13hrs to temperature rise of 20...
Hi,
I think this link would be helpful to you for typical U value.
Just take a look at
http://www.the-engineering-page.com/forms/he/typU.html
Cheers..!
Chem55
Hi,
Could you pls suggest me how can I calculate pressure vessel thickness which is made of Plexiglas, if the pressure is 150 psi at 40deg cel?
I found the formula from coulson & Richardson Vol.6 but I need Design stress of plexiglass at 40 deg cel to calculate the thickness.
Can anyone...
Hi TD2K:
I need to visualize the process inside the pressure vessel so thats the reason I'm looking for Transparent Pressure vessel.
I also had Plexiglas in my mind but I’m afraid if I tight the bolts to fix the flanges, the Plexiglas will crack.
I checked with vendors for thick clear PVC but...
Hi,
Can anyone suggest me the vendor for transparent pressure vessel?
The propane gas will be pressurized at 160psi pressure in the pressure vessel of 13inch (diameter)x 5ft long.
Thanks,
Chem55
Hi,
Can anyone suggest me the vendor for pressure vessel?
The propane gas will be pressurized at 160psi pressure in the pressure vessel of 13inch (diameter)x 5ft long.
Thanks,
Chem55
I need to use it inside and outside of the pressure vessel. I have propane gas inside the vessel and outside i have water.
Pressure vessel is immersed inside the waterbath and i dont have enough weight of the pressure vessel to keep immersed inside the water bath so i need to use any metal...
Hi Pat:
I also have to fabricate the tank to fix the flange & gasket. Is it possible to fabricate the PlexiGlass? I have heard that it is difficult to fabricate it.
I also tried to find Trogamid or Grilamid but I couldn't find it. Is it available in long 5ft pipe form?
regards,
Chem55
Hi friends:
Can I use clear (transparent)PVC for 180psi
operating pressure? I would like to use it as a
pressure vessel which is pressurised by a propane
gas at around 170psi pressure and temperature is 50 deg cel. (Pressure vessel height is 5.5ft and Inside Dia: 14inch)
Could you pls suggest...