Search results for query: *

Hey, I switched the tool axis and the error went away. I changed the drive method to area mill and that seems to have fixed the rest of the issues. Thank you so much for the help!!! Rick UG NX3/NX4/NX6 Vericut 5/6/7 AutoCAD LT

Hello All, Hoping someone can help with this. I am trying to do a fixed-contour and I am getting an error "Containment only for fixed projection same as fixed tool axis". I have the cut area defined. I have the part defined. Drive method is boundary. Roll over edges selected. I...

Hello John, I am talking about section curve in the curve toolbar. One of the options under section plane is to specify the plane. And I chose XC-YC Plane. I know that I can create a new plane and use that for the section plane and it will update correctly. I was just curious about why the...

By the way, I am using NX6 in windows 7 64 bit system. UG NX3/NX4/NX6 Vericut 5/6/7 AutoCAD LT

Hello All, If I open an assembly and make one of the pieces the work part. Then I try to create a section cut of the part using the z-plane as my cut plane. I then make the assembly my displayed part. If I make that same piece the displayed part it realigns the section cut to the current...

Hello Voran, I have not used NX8 yet, but I hope its the same as NX3, NX4, and NX6 (using now). You should find it under "cutting parameters" and then "corners". You will need to change the options under the "Feed Slowdown in Corners" tab. The other tab "Feed Adjust on Arcs" seems misleading...

The easiest, and best, way to do this is in a sketch. If you draw a line in a sketch and use the expression to control the length that should work. Also, keep in mind that when it comes to positioning the sketch you have three options. The quickest is to use a constraint and "fix" the end...

Sounds like the IT guy decided to do some overclocking to me. UG NX3/NX4/NX6 Vericut 5/6/7 AutoCAD LT

Toost, I forgot to say that the memory allocation for one session of NX6 with an assembly that has 15 piece parts is 232MB. Thanks, UG NX3/NX4/NX6 Vericut 5/6/7 AutoCAD LT

Hello Toost, The most I have ever got my RAM usage up to is 73% with 6 sessions of NX running, veritcut running, and about 10 ie windows open (just for fun). Right now, I have two assemblies (each has about 6-10 piece parts), and about 5 other parts open and my RAM usage is getting up to about...

Hello John, I tried this in NX6.0.5.3 and it did not display the dimensions from the sketch. I did: Insert-> Feature Parameters-> "select sketch"-> MB2-> "select view"-> MB2-> NX6 though for a bit but nothing happened. Checked visible in view and everything is turned on. UG NX3/NX4/NX6...

Hey Didier, I have a new M6600 with intel i7, 4GB RAM, with Firepro graphics card. So far I have not noticed the fans running at all. I am in Windows 7 64 bit BTW. Have you played with your power settings? If I set my power profile to the ultra performance mode, I still cannot hear the fans...

Well, it looks like I have a lot of fun to look forward to when we finally move to NX7.0 sometime in 2015. I finally just got to start using NX6 this year.... at least I have a shinny box with NX8 written on it sitting in the corner collecting dust. Thanks for all the help guys. UG...

Thanks for all of the information. Currently, I do not see an option for parrellel generation in NX6.0.5.3, unless there is an env. var. to set that will activate it. UG NX3/NX4/NX6 Vericut 5/6/7 AutoCAD LT

Hey John, Thank you for the info. I am not too confused, my inner geek is coming out a little though. Does parrellel tool path generation run automatically or do you have a different option in UG to select? Thank you,

Hey John, What does SMP mode actually do? I set the env var and I do notice that it runs different. Before setting the variable the generated path ran slowly but smoothly. Now its jumpy and is not as smooth. Thank you,

Hello markrief, what is this magic you speak of? Parrellel generation? How do you do that? I only see the generate button currently. Thank you.

Right now I have 4 NX6 sessions open and 1 NX4 open. I generating a pretty long program in one of the NX6 sessions. All of the nx sessions are going between 00 and 01 percent usage. My ram usage is up to 60% (4GB total). I guess my desire is that the CPU usage would just max out so that...

John, There are 4 cores. I tried to see what I could do to get the CPU usage up, so I opened 2 sessons of NX4 and 2 sessions of NX6, 1 session of Vericut, and about 10 ie windows. Had programs generating in all the UG sessions and a vericut program running. Got the cpu up to about 20 to 30...

Hey wackolacko, So you are using the space explorer along with a spandard mouse? Or do you just use this as your primary mouse. Also, I am looking for something for my laptop. Is the explorer ok to take around in a laptop bag? Thanks,