Search results for query: *

Thanks for your help!!

Yep, that's it. Using Rapid Dimension, I just created a sketch dimension and under "Driving" i checked "Expression", and it worked. Thanks, Is there any down side to making Sketch Dimensions Expressions, other that maybe a few extra clicks?

Both. In the old file, i noticed the existing features with internal/embedded sketches this still works, but if i create new feature it doesn't. As a side note, I think "internal sketch" is probably the correct term. Not "imbedded sketch." My bad.

It's not dependent on other features. For example, the problem is the same for a model that contains just one extrusion, as well as a model with fifty features.

Just moved to NX 1953 from NX 12. Previously, I was able to right mouse click on features with embedded sketches and pick Edit Parameters and the sketch dimensions would appear without going into the sketch. I no longer see this in NX 1953. Is this functionality gone? Thank you,

Made no difference in this case. Thanks.

Updated the views first thing. Didn't help. I probably should have mentioned that. Sorry.

Using NX9 I created a point and a line (using Basic Curves)on the modeling side of my drawing Dataset. When I flip to the drawing side, the point and line do not appear in any existing drawing views. This is not Layer or View Dependent issue. I've seen this before. This is a...

Using NX9 Sometimes when adding a Note, Finish Symbol, etc to a drawing, NX will allow me to select anywhere on a Dimension Extension Line for my leader termination point (my preference). Other times, when I try to select a Dimension Extension Line for my leader termination point, it snaps to...

Cowski, I understand this, but when I open the assembly in the Assembly Navigator using "STRUCTURE ONLY" I'm getting different results. Thanks

I'm using NX 9. What is the difference between opening an assembly with Load Options set to "All COMPONENTS" vs "STRUCTURE ONLY" and then opening the entire assembly in the ASSEMBLY NAVIGATOR? Thanks

Using NX 10. I create a model with a User Defined Expression which is used by a three different sketches. It works pretty good. If I change the value of the Expression, the model updates. Is there an option in Define Deformable Part, to made the User Defined Expressions Deformable? In the...

Ya,but when I change the second sketch the third changes.

For the two subtractions, I just selected the top face of the first extruded rectangle to create sketches.

Using NX10. I have a very simple model with three features. The first is a simple extruded rectangle with an embedded sketch. The other two features are simple extruded shapes subtracted from the first. The subtracted excursions have nothing to do with each other, but for some reason the...

"Also, are you working Mastermodel? In a teamcenter environment?".....Yes for both. I noticed that the dimensions don't appear dissociated until after I update the views. For some reason, each time I open the drawing file the views are out-of-date which is not an unheard-of red herring.

Using NX 10.0.3.5. I made a change to an existing drawing yesterday, and before I started, I noticed all the dimensions were dissociated. So, I reassociated all the dimension to the correct solid edges. However, when I opened up the drawing this morning all the dimensions were dissociated...

NX 10.0.3.5 Is it possible to associate a leader termination point to a drafting Center Mark or 2D Centerline. Please see the attachment....Thanks,http://files.engineering.com/getfile.aspx?folder=e549bfac-78a6-4f38-ba77-a6bc97f8247f&file=TERMINATION_POINT.jpg

NX 10.0.3.5 I added components of an assembly to various invisible layers, saved the assembly, and closed everything. Now, when I open the assembly and components, the layers containing the components become visible. Is there a setting to prevent this?....Thanks

NX 7.5.5.4 I'm working in small assembly of about 10 components. Usually, when I want to make a quick change to a component, I'll make the component the work part, right mouse click on the feature and select "edit parameters". The embedded sketch dimensions appear and I change the desired...