Hello everyone
I just need a expert opinion regarding pump selection
System requirement
Application: Water supply to the dyeing and washing machines in Laundry
Pressure requirement = 3 bar constant pressure in the loop.
Water level = 30 ft
How should I choose between a KSB water turbine and a...
We recently came across a leakage through the joint between the body and back plate of a steam trap. Upon opening it, we found significant erosion near the bolt hole, apparently due to continuous steam leakage through this path. We're trying to understand the possible reasons for this failure...
We have installed jet type dyeing machine in our industry and we want to change the hear source from steam to hot water (up to the temperature of 90 C). Technically is it possible?
Suggestions from the experts would be really appreciated.
@MartinLe, thanks for your reply. I really appreciate your time.
Unfortunately I do not have P&ID, that is the only diagram that I have.
- Yes the blue arrow behind the pumps represents bypass
- Yeah throttle vale is manually adjusted then the pressure after the valve is 15 bar
- basically it...
@EdStainless, @1503-44, @LittleInch,@coloeng, Thanks everyone for your great replies. My apologies for coloring some of the text in my post, will be conscious text time.
As from your replies I am making conclusion that VFD is not a feasible solution here because flow remains almost constant. I...
We have two stage RO plant of capacity 75 m3/h (permeate)[/color] and two high pressure pumps(51 m3/h each) are installed to maintain the feed flow. The raw water flowrate is 94 m3/hr . The throttle valve flow control strategy is applied along with the bypass. The whole scenario is shown in...
Greetings everyone
I would really appreciate if someone could help me to get the data sheet & pump curve for the KSB pump model (ETANORM 050-160 SP).
Thank You
Thank you every one for your help. I actually tried a 1000 kg water tank to fill it up and calculated the time in parallel. That is how I measure condensate flow rate.
I need to measure the quantity of condensate return at boiler end but I do not have any flow meter installed on the condensate line. I do have steam flow meter, size of the condensate pipe. What could be the possible ways to quantify the condensate return? Help from experienced members is...
I am planning to get admission in master degree so I want suggestions from you guys for research thesis especially related to energy conservation at power plant.As it is better to conserve available energy rather than energy generation because it costs a lot.I am currently working at power plant...
@JJpelim i am interested about steam turbine blades. In your case breakage is very little but if 2 or 3 blades get broken then i think vibration is only phenomenon from where we can get information
@byrdj brother can you give me any data (Practical questions and problems in power plant) related to power plant mechanical maintenance specially turbine maintenance.
What is meant by maximum continuous rating of steam turbine and what is the difference between maximum continuous ratings and rated output of steam turbine?
Can someone explain me following conditions of steam turbine operation that what exactly these are??
1. THA (Heat rate acceptance...
