I am using the below mapkeys with some windows bat files. Make a try.
Change the path location of bat files and workfolder in mapkey and bat file.http://files.engineering.com/getfile.aspx?folder=077be416-c919-4092-9f69-34af1dd4926c&file=Mapkey.zip
My company is planning to move from Intralink3.4 to iPEM with Team center engineering. Pls give your feeback about IPEM & TCE and also Pros/cons of it.
Hi Gurus,
I have to create bending information file for more number of piping assemblies.Now am using mapkey to create bend info file by opening each asm.
Is there a way i can automate the process.
-------------
I am using the following method to create the bend info...
If you are created with Offset coordinate method,Go and check the info of the point and use its x , y, z dim id to create a table in drawing.If you are good in excell you can edit those id's and import as .tbl file in drawing.
Point created with any other method also you can check its id...
Hi Gurus,
In the title block the description is more than 60 charters. We are entering it in intralink.In the drawing its shows in one line. After that we are manually correcting (short) it to TWO lines.
Its possible to place it in two lines.....what i mean is limiting the...
Chk the following links,
https://www.ptc.com/appserver/cs/view/solution.jsp?n=107529
Below is a list of the text equivalents of these characters. They are listed by row, left to right, as seen in the symbol palette:
Row 1
---------------------------
<CTRL-A> <CTRL-B> Statistical Value symbol...
Thanks dagarber.
I got it.I used the trail file which was opened through intralink.When the time of opening it will open lot of other application which are liked to Pro/e. So i got the error.
I am not familiar with J-link. I will try.Thanks once again for your post.
Hi Gurus,
I have gone through this thread thread554-144905 .
and tried out.
after running the bat file i am getting an error and not getting the part.
My bat file reads,
call C:\Proeng\proe\bin\proe1.bat -g:no_graphics D:\test_proe\test.txt
and i am getting the following error in the...