Search results for query: *

If you can't get the driver to do what you want, you can always go in the XML file and define the axis manualy. I could not get the driver to do the movement I wanted, maybe it's just me ;D

Hi, You should have better succes with your question on the forums below... http://www.eng-tips.com/threadminder.cfm?pid=561 https://community.plm.automation.siemens.com/t5/NX-Design-Forum/bd-p/NXDesignForum If with machining you mean CAM then ask on the manufactering forum...

Hi, You could try and use a centrifugal brake... Best regards, Sven

Thanks for telling us about the new Guide! In example 1 I should open the template NXOpenSample.vb. When I open this it's in chinees as you can see below. Did I do something wrong with the installation of NX11? Imports NXOpen਍ഀ Module NXOpenSample਍    匀甀戀 䴀愀椀渀 ⠀⤀ഀ...

Hi, If you temporary put the 3 last operations in unused, then transform the first operation. Add the second operation after the already transformed operations and transform the second operation. Repeat this for the last 2 operations. Regards, Sven

Hi Guys In the past I would just create a different MCS for each configuration when I didn't used a virtual machine and with a virtual machine I would create a setup file for each configuration. Is there a better way to use multiple configurations when using a virtual machine? Best Regards, Sven

I've contacted GTAC and after some mails and testing, GTAC contacted nVidea because the problem was my nVidea Geforce 650M card. Because a "gaming" card from nVidea isn't build for heavy graphics applications it's trying to compensate by using the processor and storing stuff in the ram memory...

Right now I'm working on a computer with only 4GB of RAM with no problems. I'm doing more complex stuff than I was doing on my own pc when I had the problems so i don't think its the size of my RAM.

8GB I was also thinking in that direction. NX thinks I have 16GB RAM and allocates 8GB. I only have 8GB RAM in my computer so NX may only allocate 6GB or so. Is there a way I can change how many NX can allocate?

I don't know, I've been working for 2 hours now on the same file on another computer and the RAM memory level isn't beet above 3Gb. My computer has better hardware specs than the one I'm currently working. I think its a setting on my computer that is wrong and that causes the level of the RAM...

I've deleted that file already, I read it on another topic that that could be the problem but no help for me.

If I open the file now and I generate everything there is no problem, the problem is when I'm working for a wile on the file. It seems like it remembers everything and stores it in my RAM memory so eventually it would be full. I'll contact them, thanks for the help.

That's strange, when I open the setup file there are operations. I've attached it again but in a zip file. There is a map in the zip file where the right components are located. Can you try again and open the setup file again, normal there should be operations. This is a workpiece that I've...

This is the last component and the main set-up file. I'm also using tools from the library that I've created.http://files.engineering.com/getfile.aspx?folder=63e36b12-e13a-4804-88ab-e66d58e7b640&file=Opspanblok_Links_setup_1.prt

This is another component to the one before.http://files.engineering.com/getfile.aspx?folder=0bc97998-feae-41b2-8d5e-a06040a629e7&file=Opspanblok_Links.prt

The file that I've included is not the most complex one were I've worked on. But I had the problem with this file. When I open this part, I've plenty of RAM-memory, but when I'm working on it for a while my memory usage...

I'm using planar milling, contour milling and multi-axes milling operations. When I'm using only planar and contour milling operations I have the same problem. Not using any reference tools. I do use IPW.

I'm running NX9.0.3 64-Bit version Sometimes I get "memory access violation" but that happened not very much since i use NX9. In NX8 I would get that regularly. (That was also on another PC)

What do you mean by what is my program doing? I'm not writing any code or so. I'm programming in NX CAM.

Hi Everyone, When I'm programming in NX after a while my pc is slowing down because NX is taking up all my RAM memory. I'm not using large assembly's or extreme complex workpieces. It seems that it doesn't matter what I open or how many files but how long NX is running. My pc specs: Intel Core...