Dear All,
We are in phase of implementation for solid works EPDM in our organization, we have three different Location where user is accesing the CAD Data for different Project, and we want to make common folder for Standards library parts which is used at all three location, and some different...
Dear All,
I am doing Vibration Analysis of Box which is actually mounted in Railway Coaches, In which I need to check feasibility of Mechanical structure, which can withstand 3G shock in X, Y and Z Direction,
Any body has done the same?
appreciate your help and support!!
PS. This Box(under...
Hijstluise,
Thanks for knowldedge sharing, It really help.
That simple alpha-numeric revision scheme already adopted /used CISCO,when I used to work with them.
Thanks & Regards
Asit
Hi jstluise,
NO we are not using any PDM as of date now we are Planning to use PDM in solidworks, (we have SW2012 Professional)
I believe the best way is the pointno1, Which you mentioned Bump the revision on the part, and automatically bump the revision on the drawing.
Current practice we...
Dear jstluise,
we are also in same kind of group R&D , we are making prototype of power electronics component, after testing it will be release to Engineering Department, and then finally Engineering will updated the 3D/2D as per the customer requirement.
Older Practise
Also having problem of...
Dear All,
I am using Solidworks 2012 64 Bit with 16 GB RAM and with Windows7.
and need to insert Hardwares in to Main Panel assembly Like hardwares (Screws, Nut, Bolt, Washers) etc..
After adding hardwares (may be more than 500's or More) I got solid works Virtual Memory Error.
and Its...
Dear StressbookLLC,
the software which i used for simualation, in which auto option of auto Meshing of 3D CAD DAta and used Automesh 3D Tet elements, so used 3D Element,If I will used 2D Shell and 3D Tet Elments how far from result? Any suggestion.
Thanks & Regards
Asit Rathod
Dear rb1957,
Is it not advisable to used 3D Tetra Mesh in sheet metal? I already solve few problems on that and I got very nearer result. what element you are using for solving sheet metal?
aerostress82,
I usually prefer to go with option2, as my 3.0 mm thk sheet metal I used to give two...
Dear All,
I am researching on what will be minimum Mesh size required for sheet metal?
If any one knows any research material,any paper please let me know...
Thanks in advance
Regards
Asit Rathod
Yes, Same is the case with me,
Some times in big Assy Drawings ISO view go away. rest items keeps as it is, like annotation andd Dimensions etc...
approaches I used
-Just Restart the PC and it will work fine.. I don't know the reason..[ponder]
Asit
randomdrafter,
Yes same our mfg did it for Sheet metal parts, first nesting (Diff sizes, set in raw material sheet), and then punching and then cutting at last bending, and then Assembly HW fitting like rivets, Pop nuts
Regards
Asit
Dear All,
I needed to convert solid3D Sheetmetal parts/Assy to Surface Model for simulations, I needed Surface Assembly so I can apply the 2D Shell Element and run the Analysis for Different Material thickness?
I tried with Offset surface option to create mid plane surface, and then delete...
Needed BUS @ cheeper price, so needed Standards size RM standards, so at the design stange itself I can design accordingly, even procurement time also can be save if the standards sizes readily available.
Marshell, usually we prefer to give Material and painting(Paint shade, paint thk,paint type)info in Parts Drawings, in Assembly drawings only balloning and assembly instruction is there.
KENAT, I believe you means to say tolerance stack up needs to calculate for all the holes in parts, depending up on that hole sizes will vary.
Do you have any standards to be followed? or what best practise you are following.
Thanks in advance.
Regards
Asit
Dear All,
Can Any Body know RAW Material Sies available in Flat/Plate for Copper Busbar?
Does Any IS and ISO Standards Avaialble for same.
Thanks in advance.
Best Regards
Asit
