Is there anybody out there that knows about manufacturing very fine 316 stainless steel rope. The 'rope' diameter is 0.5mm and has to be made from 7 strands (i.e. each strand 0.07mm diameter). The quantity required is approximately 900,000 metres and has to be supplied in the form of 30m long lengths x 30,000 off. The rope has to be pre-stretched to remove its initial constructional extension. The end user (a famous artist)has stated that the wire needs to be in a state so that when a weight is placed on the rope and then removed, the rope returns to the same length as before, i.e. no non-elastic extension.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
316 stainless steel rope 0.5mm diameter
- Thread starter pmad123
- Start date
Here is one company that you might query for you wire rope.
richardbuss
Materials
- Status
Similar threads
- Locked
- Question