7 axis post processor for CITIZEN A32

[rahulgoje]

Hi

I am willing to create a post processor for 7 axis CITIZEN A32. Please let me know how to start multi axis machining in UG NX Post builder in 7.5 version , I have little bit experience in turn mill 4 axis post processor, please do the needful how to get start in nx post builder

Thanking you

 

[Toost]

Is it only what can be seen in the attached image, or is it a training class for Post Builder you need ?

Regards,
Tomas

 

[rahulgoje]

Hi,

Thank you for your response but i need training how to get start with and how to do multi axis post processor

 

[codecodelin]

if you want to boild more than 5 axis post in nx you should link more than 2 post then use head directive in nx let the program
chose which post and its kinematics.
if you dont have any experience you will be tired.this machine is a type of swiss machine, i have build my post for star sr32 which is similar
that yours. if you need my post send me what you want in your post. codelinker@hotmail.com

 

[Toost]

well, hm, Post Builder isn't something you can learn in a discussion forum. It's way too complex for that.


Regards,
Tomas

 

[markrief]

Tomas is correct.
If you cannot take the instructor led class, then at least go through some of the many videos available on the Siemens Manufacturing Community site. Search for "post builder" on [URL unfurl="true"]http://community.plm.automation.siemens.com/t5/Tech-Tips-Knowledge-Base-NX/tkb-p/open_forum_1%40tkb[/url]

Mark Rief
NX CAM Customer Success
Siemens PLM Software