Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A couple of NX9 Drafting Questions

Status
Not open for further replies.

TomLoughlin

Military
Mar 14, 2014
18
Morning all,

Just upgraded to NX9 yesterday, very pleased to see that three of my niggles coming from NX6.0 have all been addressed [bigsmile]

I've got a couple of questions from using it in anger for a day (both drafting questions):
1. Is there a symbol for Edges of undefined shape? I currently use two custom symbols that I think were created years ago.
getfile.aspx

2. How do I flip a dimension leader arrow - I'm sure there will be a button somewhere, but can't see one. I want the machining tick to be on the inside of the section.
getfile.aspx
 
Replies continue below

Recommended for you

Well I've found a bodge to fix the machining tick leader arrow - I have added a jog and pulled the arrow onto the inside - so although it's not perfect, it does the job.



Contract Mechanical Design Engineer.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor