Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

About GM Toolkit

Status
Not open for further replies.

stevenfeng

Automotive
Jul 14, 2003
1
CA
Can anybody tell me something about the GM Toolkit? How it works and what is its main functions?

Thanks a lot.

 
Replies continue below

Recommended for you

Only available if you are a supplier to GM.

Lots of custom programs for checking models and creating drawings to GM standards.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
 
I had to use the GM toolkit a couple of years ago. At the time GM offered a half day training class. It covered how to use the toolkit as well as what GM will and will not accept. It was a great help.
 
I use GM Toolkit.
Just as Ben said, "lots of custom programs"
I use it mostly to create 11X17 GM Standard drawings
and for Checking for DCS (Data Creation Standard) compliance.

There are a lot of tools and I only know some of them.
Don't have the time to check out the other stuff.

I did use the tank analysis. It has options to determine
at what level a certain volume of a tank would be, including vapor levels, and at different grades.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top