Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

About standby filter in circulation system for swimming pool

Status
Not open for further replies.

NguyenNhat

Civil/Environmental
Apr 24, 2017
7
Hi everyone, someone please tell me what code require that we must design the standby filter in the circulation system for public swimming pool? thank you very much, and sorry about my bad English.
 
Replies continue below

Recommended for you

I am not sure exactly what information you are looking for but here are some typical design parameters for the filters that may get you started.

You should be able to recirculate the whole contents of the pool through the filters in 4 hours or less.
Filtration rate is typically 20-40m/hr for a multimedia filter.
It is usual to use multiple cells so that the circulation pump has enough flow capacity to backwash one of the cells with the others off line.


Regards
Ashtree
"Any water can be made potable if you filter it through enough money"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor