Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Danlap on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

adding a part to an Alt Rep

Status
Not open for further replies.
msp544

msp544

Automotive
Sep 6, 2016
2
How do I allow a part to be added to an Alt Rep?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Hello,

Use the Assembly Arrangements command to define alternative positions for one or more components or subassemblies in your part.




regards,
Mathi Krishnan
NX10.0.2.6
 
Upvote 0 Downvote
Does anyone know of setting to change to allow a part to be added to an alt rep within Teamcenter?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Werner K
  • Locked
  • Question
Pull expression values into a component when adding to an assembly
Replies
5
Views
353
Werner K
Werner K
CAD2015
  • Locked
  • Question
NX - Creating a drawing from a part...... 2
Replies
6
Views
768
CAD2015
CAD2015
Werner K
  • Locked
  • Question
Clone PTS part to subassembly
Replies
0
Views
121
Werner K
Werner K
Forzindi
  • Question
Can we attach a solid body through journal in NX part ?
Replies
1
Views
2K
Bleaker
Bleaker
NXsupport
  • Question
Is there a quick way to dynamically move a datum place across a body to measure minimum wall thickness
Replies
1
Views
1K
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top Bottom