Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

alternate engine design

Status
Not open for further replies.

blown

New member
Mar 11, 2003
5
just a quick question i hope some one can answer, a few years ago i came across a drawing of an internal combustion engine that was shaped like a shere with an out put shaft and internal vanes (that created the compression) it was also had variable compression properties, can anyone direct me to a link or know where a copy of the working plans could be??

 
Replies continue below

Recommended for you

Nope,that's a wankel. Old technology. The OP was asking about a new idea.
 
it was definatly a shere (new design) not a wankel, im sure it was on this site that someone had posted a link (few years ago now)
 
sorry i ment sphere shaped (ball) with 1 out put shaft sticking out
 
Blown. A year or so ago someone put an engine on this site he thought should be modeled. I was going though a stack of paper work and came up with his patent. US # 4949688 This may be what you are referring to.
This IC motor has serious draw backs. I mentioned some of them on the thread at the time. Can not find the thread now. Prehaps it was removed.
 
thanks ccycle, iv found something similar to what i remember it is pat # 5336067 thanks again
 
thanks all, i found a us pat # 4024841 which is the one i remember, does any one know if this design would be efficient, seems to have a lot of moving parts
 
Short commentary about similar engines:

Here in Australia, the Sarich Orbital Engine was going to be the next big engine breakthough:

orbit.jpe



LewTam Inc.
Petrophysicist, Leading Hand, Natural Horseman, Prickle Farmer, Crack Shot, Venerable Yogi.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor