MichalM1985
Mechanical
- Nov 24, 2012
- 2
I have problem witch analysis.
"an unknown error occurred during solutions"
Someone can help?
The solver file:
Solver Output
ANSYS Multiphysics
*-------------------------------------------------------------*
| |
| W E L C O M E T O T H E A N S Y S P R O G R A M |
| |
*-------------------------------------------------------------*
***************************************************************
* ANSYS 13.0 LEGAL NOTICES *
***************************************************************
* *
* COPYRIGHT AND TRADEMARK INFORMATION *
* *
* Copyright 2010 SAS IP, Inc. All rights reserved. *
* Unauthorized use, distribution or duplication is *
* prohibited. *
* *
* See the ANSYS, Inc. online documentation or the ANSYS, Inc. *
* documentation CD for the complete Legal Notice. *
* *
***************************************************************
* *
* DISCLAIMER NOTICE *
* *
* THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION *
* EMBODY TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY *
* INFORMATION OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. *
* The software products and documentation are furnished by *
* ANSYS, Inc. or its subsidiaries under a software license *
* agreement that contains provisions concerning *
* non-disclosure, copying, length and nature of use, *
* compliance with exporting laws, warranties, disclaimers, *
* limitations of liability, and remedies, and other *
* provisions. The software products and documentation may be *
* used, disclosed, transferred, or copied only in accordance *
* with the terms and conditions of that software license *
* agreement. *
* *
* ANSYS, Inc. and ANSYS Europe, Ltd. are UL registered *
* ISO 9001:2000 Companies. *
* *
***************************************************************
* *
* U.S. GOVERNMENT RIGHTS *
* *
* For U.S. Government users, except as specifically granted *
* by the ANSYS, Inc. software license agreement, the use, *
* duplication, or disclosure by the United States Government *
* is subject to restrictions stated in the ANSYS, Inc. *
* software license agreement and FAR 12.212 (for non-DOD *
* licenses). *
* *
***************************************************************
***** ANSYS COMMAND LINE ARGUMENTS *****
BATCH MODE REQUESTED (-b) = NOLIST
INPUT FILE COPY MODE (-c) = COPY
SINGLE CPU REQUESTED
START-UP FILE MODE = NOREAD
STOP FILE MODE = NOREAD
00000000 VERSION=INTEL NT RELEASE= 13.0 UP20101012
CURRENT JOBNAME=file 18:45:06 NOV 24, 2012 CP= 0.780
PARAMETER _DS_PROGRESS = 999.0000000
/INPUT FILE= ds.dat LINE= 0
DO NOT WRITE ELEMENT RESULTS INTO DATABASE
*GET _WALLSTRT FROM ACTI ITEM=TIME WALL VALUE= 18.7516667
TITLE=
aaa--Magnetostatic (A5)
--- Data in consistent MKS units.
MKS UNITS SPECIFIED FOR INTERNAL
LENGTH (l) = METER (M)
MASS (M) = KILOGRAM (KG)
TIME (t) = SECOND (SEC)
TEMPERATURE (T) = CELSIUS (C)
TOFFSET = 273.0
CHARGE (Q) = COULOMB
FORCE (f) = NEWTON (N) (KG-M/SEC2)
HEAT = JOULE (N-M)
PRESSURE = PASCAL (NEWTON/M**2)
ENERGY (W) = JOULE (N-M)
POWER (P) = WATT (N-M/SEC)
CURRENT (i) = AMPERE (COULOMBS/SEC)
CAPACITANCE (C) = FARAD
INDUCTANCE (L) = HENRY
MAGNETIC FLUX = WEBER
RESISTANCE (R) = OHM
ELECTRIC POTENTIAL = VOLT
INPUT UNITS ARE ALSO SET TO MKS
*****TRACK MONITOR LEVEL= -1
TRACK PRINT LEVEL = 0
TRACK SUMMARY LEVEL= 0
1
***** ANSYS - ENGINEERING ANALYSIS SYSTEM RELEASE 13.0 *****
ANSYS Multiphysics
00000000 VERSION=INTEL NT 18:45:06 NOV 24, 2012 CP= 1.030
aaa--Magnetostatic (A5)
***** ANSYS ANALYSIS DEFINITION (PREP7) *****
*********** Nodes for the whole assembly ***********
*********** Elements for Body 1 "Solid" ***********
*********** Elements for Body 2 "Solid" ***********
*********** Elements for Body 3 "Solid" ***********
*********** Send User Defined Coordinate System(s) ***********
*********** Set Reference Temperature ***********
*********** Send Materials ***********
*********** Create FluxPar ***********
***** ROUTINE COMPLETED ***** CP = 1.420
--- Number of total nodes = 61982
--- Number of contact elements = 0
--- Number of spring elements = 0
--- Number of solid elements = 13794
--- Number of total elements = 13794
*GET _WALLBSOL FROM ACTI ITEM=TIME WALL VALUE= 18.7519444
****************************************************************************
************************* SOLUTION ********************************
****************************************************************************
***** ANSYS SOLUTION ROUTINE *****
WRITE ALL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
FOR ALL APPLICABLE ENTITIES
****************************************************
******************* SOLVE FOR LS 1 ****************
USE AUTOMATIC TIME STEPPING THIS LOAD STEP
USE 1 SUBSTEPS INITIALLY THIS LOAD STEP FOR ALL DEGREES OF FREEDOM
FOR AUTOMATIC TIME STEPPING:
USE 10 SUBSTEPS AS A MAXIMUM
USE 1 SUBSTEPS AS A MINIMUM
TIME= 1.0000
ERASE THE CURRENT DATABASE OUTPUT CONTROL TABLE.
WRITE ALL ITEMS TO THE DATABASE WITH A FREQUENCY OF NONE
FOR ALL APPLICABLE ENTITIES
WRITE ALL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
FOR ALL APPLICABLE ENTITIES
CONVERGENCE ON CSG BASED ON THE NORM OF THE N-R LOAD
WITH A TOLERANCE OF 0.5000E-02 AND A MINIMUM REFERENCE VALUE OF 0.1000E-05
USING THE L2 NORM (CHECK THE SRSS VALUE)
*GET ANSINTER_ FROM ACTI ITEM=INT VALUE= 0.00000000
*IF ANSINTER_ ( = 0.00000 ) NE
0 ( = 0.00000 ) THEN
*ENDIF
***** ANSYS SOLVE COMMAND *****
*** TREE GAUGING FOR EDGE ELEMENTS ***
*** ERROR *** CP = 1.513 TIME= 18:45:07
*** GAUGE command aborted ***
NUMBER OF WARNING MESSAGES ENCOUNTERED= 0
NUMBER OF ERROR MESSAGES ENCOUNTERED= 1
***** PROBLEM TERMINATED BY INDICATED ERROR(S) OR BY END OF INPUT DATA *****
+--------------------- A N S Y S S T A T I S T I C S ------------------------+
Release: 13.0 UP20101012 Version: INTEL NT
Date Run: 11/24/2012 Time: 18:45
Windows Process ID: 4664
Number of cores: 1 (Shared Memory Parallel)
GPU Acceleration: Not Requested
Job Name: file
Working Directory: C:\Users\Misiek\Documents\ansys nowe\_ProjectScratch\Scr7515
Elapsed time spent pre-processing model (/PREP7) : 0.4 seconds
Elapsed time spent solution - preprocessing : 0.0 seconds
Elapsed time spent computing solution : 0.0 seconds
Elapsed time spent solution - postprocessing : 0.0 seconds
Elapsed time spent post-processing model (/POST1) : 0.0 seconds
+------------------ E N D A N S Y S S T A T I S T I C S -------------------+
*---------------------------------------------------------------------------*
| |
| ANSYS RUN COMPLETED |
| |
|---------------------------------------------------------------------------|
| |
| Release 13.0 UP20101012 INTEL NT |
| |
|---------------------------------------------------------------------------|
| |
| Database Requested(-db) 256 MB Scratch Memory Requested 256 MB |
| Maximum Database Used 25 MB Maximum Scratch Memory Used 29 MB |
| |
|---------------------------------------------------------------------------|
| |
| CP Time (sec) = 1.591 Time = 18:45:07 |
| Elapsed Time (sec) = 4.000 Date = 11/24/2012 |
| |
*---------------------------------------------------------------------------*
"an unknown error occurred during solutions"
Someone can help?
The solver file:
Solver Output
ANSYS Multiphysics
*-------------------------------------------------------------*
| |
| W E L C O M E T O T H E A N S Y S P R O G R A M |
| |
*-------------------------------------------------------------*
***************************************************************
* ANSYS 13.0 LEGAL NOTICES *
***************************************************************
* *
* COPYRIGHT AND TRADEMARK INFORMATION *
* *
* Copyright 2010 SAS IP, Inc. All rights reserved. *
* Unauthorized use, distribution or duplication is *
* prohibited. *
* *
* See the ANSYS, Inc. online documentation or the ANSYS, Inc. *
* documentation CD for the complete Legal Notice. *
* *
***************************************************************
* *
* DISCLAIMER NOTICE *
* *
* THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION *
* EMBODY TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY *
* INFORMATION OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. *
* The software products and documentation are furnished by *
* ANSYS, Inc. or its subsidiaries under a software license *
* agreement that contains provisions concerning *
* non-disclosure, copying, length and nature of use, *
* compliance with exporting laws, warranties, disclaimers, *
* limitations of liability, and remedies, and other *
* provisions. The software products and documentation may be *
* used, disclosed, transferred, or copied only in accordance *
* with the terms and conditions of that software license *
* agreement. *
* *
* ANSYS, Inc. and ANSYS Europe, Ltd. are UL registered *
* ISO 9001:2000 Companies. *
* *
***************************************************************
* *
* U.S. GOVERNMENT RIGHTS *
* *
* For U.S. Government users, except as specifically granted *
* by the ANSYS, Inc. software license agreement, the use, *
* duplication, or disclosure by the United States Government *
* is subject to restrictions stated in the ANSYS, Inc. *
* software license agreement and FAR 12.212 (for non-DOD *
* licenses). *
* *
***************************************************************
***** ANSYS COMMAND LINE ARGUMENTS *****
BATCH MODE REQUESTED (-b) = NOLIST
INPUT FILE COPY MODE (-c) = COPY
SINGLE CPU REQUESTED
START-UP FILE MODE = NOREAD
STOP FILE MODE = NOREAD
00000000 VERSION=INTEL NT RELEASE= 13.0 UP20101012
CURRENT JOBNAME=file 18:45:06 NOV 24, 2012 CP= 0.780
PARAMETER _DS_PROGRESS = 999.0000000
/INPUT FILE= ds.dat LINE= 0
DO NOT WRITE ELEMENT RESULTS INTO DATABASE
*GET _WALLSTRT FROM ACTI ITEM=TIME WALL VALUE= 18.7516667
TITLE=
aaa--Magnetostatic (A5)
--- Data in consistent MKS units.
MKS UNITS SPECIFIED FOR INTERNAL
LENGTH (l) = METER (M)
MASS (M) = KILOGRAM (KG)
TIME (t) = SECOND (SEC)
TEMPERATURE (T) = CELSIUS (C)
TOFFSET = 273.0
CHARGE (Q) = COULOMB
FORCE (f) = NEWTON (N) (KG-M/SEC2)
HEAT = JOULE (N-M)
PRESSURE = PASCAL (NEWTON/M**2)
ENERGY (W) = JOULE (N-M)
POWER (P) = WATT (N-M/SEC)
CURRENT (i) = AMPERE (COULOMBS/SEC)
CAPACITANCE (C) = FARAD
INDUCTANCE (L) = HENRY
MAGNETIC FLUX = WEBER
RESISTANCE (R) = OHM
ELECTRIC POTENTIAL = VOLT
INPUT UNITS ARE ALSO SET TO MKS
*****TRACK MONITOR LEVEL= -1
TRACK PRINT LEVEL = 0
TRACK SUMMARY LEVEL= 0
1
***** ANSYS - ENGINEERING ANALYSIS SYSTEM RELEASE 13.0 *****
ANSYS Multiphysics
00000000 VERSION=INTEL NT 18:45:06 NOV 24, 2012 CP= 1.030
aaa--Magnetostatic (A5)
***** ANSYS ANALYSIS DEFINITION (PREP7) *****
*********** Nodes for the whole assembly ***********
*********** Elements for Body 1 "Solid" ***********
*********** Elements for Body 2 "Solid" ***********
*********** Elements for Body 3 "Solid" ***********
*********** Send User Defined Coordinate System(s) ***********
*********** Set Reference Temperature ***********
*********** Send Materials ***********
*********** Create FluxPar ***********
***** ROUTINE COMPLETED ***** CP = 1.420
--- Number of total nodes = 61982
--- Number of contact elements = 0
--- Number of spring elements = 0
--- Number of solid elements = 13794
--- Number of total elements = 13794
*GET _WALLBSOL FROM ACTI ITEM=TIME WALL VALUE= 18.7519444
****************************************************************************
************************* SOLUTION ********************************
****************************************************************************
***** ANSYS SOLUTION ROUTINE *****
WRITE ALL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
FOR ALL APPLICABLE ENTITIES
****************************************************
******************* SOLVE FOR LS 1 ****************
USE AUTOMATIC TIME STEPPING THIS LOAD STEP
USE 1 SUBSTEPS INITIALLY THIS LOAD STEP FOR ALL DEGREES OF FREEDOM
FOR AUTOMATIC TIME STEPPING:
USE 10 SUBSTEPS AS A MAXIMUM
USE 1 SUBSTEPS AS A MINIMUM
TIME= 1.0000
ERASE THE CURRENT DATABASE OUTPUT CONTROL TABLE.
WRITE ALL ITEMS TO THE DATABASE WITH A FREQUENCY OF NONE
FOR ALL APPLICABLE ENTITIES
WRITE ALL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL
FOR ALL APPLICABLE ENTITIES
CONVERGENCE ON CSG BASED ON THE NORM OF THE N-R LOAD
WITH A TOLERANCE OF 0.5000E-02 AND A MINIMUM REFERENCE VALUE OF 0.1000E-05
USING THE L2 NORM (CHECK THE SRSS VALUE)
*GET ANSINTER_ FROM ACTI ITEM=INT VALUE= 0.00000000
*IF ANSINTER_ ( = 0.00000 ) NE
0 ( = 0.00000 ) THEN
*ENDIF
***** ANSYS SOLVE COMMAND *****
*** TREE GAUGING FOR EDGE ELEMENTS ***
*** ERROR *** CP = 1.513 TIME= 18:45:07
*** GAUGE command aborted ***
NUMBER OF WARNING MESSAGES ENCOUNTERED= 0
NUMBER OF ERROR MESSAGES ENCOUNTERED= 1
***** PROBLEM TERMINATED BY INDICATED ERROR(S) OR BY END OF INPUT DATA *****
+--------------------- A N S Y S S T A T I S T I C S ------------------------+
Release: 13.0 UP20101012 Version: INTEL NT
Date Run: 11/24/2012 Time: 18:45
Windows Process ID: 4664
Number of cores: 1 (Shared Memory Parallel)
GPU Acceleration: Not Requested
Job Name: file
Working Directory: C:\Users\Misiek\Documents\ansys nowe\_ProjectScratch\Scr7515
Elapsed time spent pre-processing model (/PREP7) : 0.4 seconds
Elapsed time spent solution - preprocessing : 0.0 seconds
Elapsed time spent computing solution : 0.0 seconds
Elapsed time spent solution - postprocessing : 0.0 seconds
Elapsed time spent post-processing model (/POST1) : 0.0 seconds
+------------------ E N D A N S Y S S T A T I S T I C S -------------------+
*---------------------------------------------------------------------------*
| |
| ANSYS RUN COMPLETED |
| |
|---------------------------------------------------------------------------|
| |
| Release 13.0 UP20101012 INTEL NT |
| |
|---------------------------------------------------------------------------|
| |
| Database Requested(-db) 256 MB Scratch Memory Requested 256 MB |
| Maximum Database Used 25 MB Maximum Scratch Memory Used 29 MB |
| |
|---------------------------------------------------------------------------|
| |
| CP Time (sec) = 1.591 Time = 18:45:07 |
| Elapsed Time (sec) = 4.000 Date = 11/24/2012 |
| |
*---------------------------------------------------------------------------*