anchor bolts

[palmeira]

Where can I get papers with informations about anchor bolts in reinforced concrete?

Palmeira

 

[IJR]

Lately there have been talks on a PCA publication related to achor bolt design.

Try also to check on thread592-4469 in The Concrete Engineering forum (or simply do use the search utility in Eng-Tips as follows: Search - keyword "anchor bolts"-all forums and go)where a similar question was posed and several references were given by pals here who are almost experts on the subject.

regs
IJR

 

[chandr]

I found the materials here very helpful: AISC's Design Guide 7: Industrial Buildings: Roofs to Column Anchorage / Fisher (1993)

 

[JAE]

There is a very good design procedure outlined in the Uniform Building Code, 1997 under Section 1923.

Also, some of the concepts and principles can be found in a publication by Nelson Stud Welding Division.

http://www.nelsonstudwelding.com/

 

[mgg]

Personally, I use the AISC LRFD bolt design under combined loading to design anchor bolts. As far as the anchorage strength of the concrete, I apply the 1997 UBC provisions as well as the provisions in the latest PCI design handbook.