any standard for Drafter, checker and approve duties and responsibilities?

[JavadM]

hi friends
i asked for finding standards that clearly describe the duties and responsibilities for drafter
checker and who approves the engineering and technical drawings.
help me please



special thanks

 

[greenimi]

Probably these are "company specific" standards and not national standards.
Each and every company have its own set of rules and regulations about those duties and responsibilities.
Maybe you can find some general guidelines........as a non-mandatory standards.

 

[ctopher]

I agree with greenimi,
I don't know of any 'national' standard.
We have an internal standard, unfortunately I can't share it.

ctopher, CSWP
SolidWorks '17
ctophers home
SolidWorks Legion

 

[mkcski]

I agree with everything said so far. This is a tough job to define as many have said; it is very product/process centric. Not only knowing good drafting practices - which are typically interpreted as knowing how to create "lines" in CAD but is really MUCH more - the person must have an understanding of the audience that will be reading the drawing. For example: a machining drawing should be checked by a person with knowledge of what a machinist is "looking" for on a drawing. Same for fabrication, welding, coatings, etc. disciplines.

Certified Sr. GD&T Professional

 

[JavadM]

hi all.
thanks a lot for the information you shared with me.


best wishes to you

 

[drawoh]

JavadM,

This has been discussed.

thread1103-193286

thread765-194599

--
JHG

 

[JavadM]

hello drawoh

thanks a lot