Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Approximate percentage of Vertical Component Base Shear in RCC Buildings.

Status
Not open for further replies.
satyajitmhatre

satyajitmhatre

Structural
Nov 2, 2019
1
Hello All,
What is the approximate percentage of Vertical Component of Base Shear (EQ-Z) of Maximum of Horizontal Base Shear (In X or Y direction) or Seismic Weight should we get in RCC Buildings (as a thumb rule) ?

Many Thanks,
Satyajit
 
Status
Not open for further replies.

Similar threads

adrianstructures
  • Question
calculation for vertical shear forces
Replies
1
Views
2K
SWComposites
SWComposites
EngrRC
  • Question
Seismic design base shear to ASCE7-16
Replies
1
Views
3K
driftLimiter
driftLimiter
KootK
  • Question
Guide to the Design of Common Irregularities in Buildings
Replies
5
Views
5K
KootK
KootK
M
  • Locked
  • Question
About steel beam and shear wall combinations in high-rise buildings
Replies
5
Views
3K
human909
human909
pir8engineer
  • Question
Moment capacity of circular base plate 1
Replies
6
Views
1K
jhnblgr
jhnblgr

Part and Inventory Search

Sponsor

Back
Top Bottom