Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Argon Liquid to Gas

Status
Not open for further replies.

MADHU MADATHIL

Mechanical
Jan 19, 2024
3
What will the conversion ratio of Argon from Liquid to Gas. what are the ways to convert. what pressure I can achieve to gas form.
 
Replies continue below

Recommended for you

This belongs in chemical engineering forum.
What are you trying to achieve?
Do you have a maximum/minimum flow that you need?
Max/min pressures?
I presume that you are working from a bulk tank.
Typically, you use an aluminum vaporizer that is sized for your flow and local climate conditions.
The liquid tanks usually come in two different pressure ratings, 150psi or 250psi.
This goes for smaller portable liquid gas tanks also.
Contact your bulk gas supplier.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Argon is a gas at ambient conditions. If you have liquid argon at ambient pressure it will colder than -189ºC

--- Best regards, Morten Andersen
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor