I'm located in the U.S. & am designing a control system to AS requirements. Incoming voltage is 690 VAC, 50 Hz. Per spec. HRC fuses are required. I need a fusible disconnect switch & fuses for the power section. Can anyone recommend a suitable switch & fuse mfr.? Fuses will also be required for the VFD & step-down transformer primary. Also while I'm at it, can anyone tell me where to find a 690/120 transformer, around 375 VA? Mfr. & P/N's would be appreciated. Thanks very much for your help.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
AS Fusing Requirements
- Thread starter audios
- Start date
Similar threads
- Question
- Locked
- Question
- Locked
- Question