Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ask for "Is NX part checked out" in nxopen....

Status
Not open for further replies.
lklo

lklo

Industrial
Joined
Nov 24, 2010
Messages
226
Location
DK
Hi -
I had been looking in the NET APi Reference for some call's to be used for information about if a certain nx part is checked out or not, when running nx11 in managed mode...
I couldnt find anything - but will just ask some of you guys, if you are aware about a method...
I need this information (checked out or checked in) in a small journal i am authoring these days....

a workaround could be:
Do some ITK stuff in temacenter config , and then from the nx side use the call UF_UGMGR_invoke_pdm_server
lklo
 
Status
Not open for further replies.

Similar threads

Anton Liubimov
  • Locked
  • Question Question
NxOpen, How to programmatically open a dialog box "Extrude"
Replies
2
Views
828
Anton Liubimov
Anton Liubimov
Nahid Mubin
  • Question Question
Standard Practice for Drafting in NX
Replies
1
Views
2K
Toost
Toost
H
  • Question Question
NXOpen Section view creation
Replies
6
Views
5K
Husky Dusky
H
Asieros
  • Locked
  • Question Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
722
Asieros
Asieros
CADologist
  • Locked
  • Helpful tip Helpful tip
NX Journal - Assign Material to All bodies in part; Assign Description to "Description Attribut
Replies
0
Views
625
CADologist
CADologist

Part and Inventory Search

Sponsor

Back
Top