ASME vessel drawings showing 2

[VPN16]

I have seen in the internet, a pressure vessel drawing showing the various ASME code sections. FOr example if I move the cursor to nozzle it will show the correct UG section of the ASME code, if I move the cursor to tubesheet it will show the ASME code section to be followed. But I don't know which

http://www site.

Your help will be appreciated.

 

[Christine74]

I've used that before, it's available to those of us who use Hartford Steam Boiler as their AIA:

http://www.hsbglobalstandards.com/

The figure is called the "Quick Reference Guide" which is listed under "tech resources" (registration is required).

-Christine

 

[unclesyd]

HSB did limit registration to HSB clients. If you are not a client you can order a reference chart for section I, III, VIII, for US $35. The code number is 012 and you can order it from their book store at the above referenced website

 

[VeryPicky]

Oil and Gas Inquirer publishes ASME pressure vessel chart. It is not interactive but it's a good reference. And what is important I get it for free at pressure vessel conferences. I don't know how available it is in your area VPN16.

Putting Human Factor Back in Engineering

 

[mec443]

Please is there a standard table that will show the dimensions of different capacities of lpg cylindrical vessels.

 

[Christine74]

I just found what the OP was describing this morning:

http://www.nooter.com/nooterweb/asme/

-Christine