Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Automatic Opening Umbrella Operated by Push Button on the Bottom of the Handle

Status
Not open for further replies.

DistressedNerd

Electrical
Dec 11, 2014
45
If you can help me solve this problem I will name my pet chinchilla after you.

I am incorporating a similar locking mechanism to that found in an automatic opening umbrella that unlocks with push of button, the catch is that I need a umbrella in which the push button is in the same line of travel as the collapsing shaft - in other words I need a automatic opening umbrella operated by push button located on the bottom of the handle - not the side as shown in the attached picture.
1337221862887_mzlkf2.jpg

1337221862887.jpg
 
Replies continue below

Recommended for you

Have you heard of cams?

"Schiefgehen wird, was schiefgehen kann" - das Murphygesetz
 
dvd - thank you I will be able to complete a functional prototype, however it would be great to have a similar mechanism (see quick video demonstration "Link" and picture) that's not $25 a pop and could be viably mass manufactured. Any recommendations?

Link

pkpqrpcs.jpg
 
If you cannot extrapolate from the quick release pin to what you need, then I probably can't help you.
 
Why are you trying to reinvent the wheel?

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor