Axis system problem

[Kristian Mueller]

When create new axis system on some Body, and make sketch, if use line, direction of line is not (for example)by new axis X - but by direction H. How change or add new axis system with new direction of H and V? When i add new axis system H and V direction is same.

 

[dougsnell]

You can control the location/orientation of the Sketches origin elements through the use of a 'Positioned' sketch. This can be accessed by selection Positioned option from the drop down menu in the Create Sketch dialog box.

When using the Sliding option the Part file origin is going to be the default origin location and orientation. The positive H and V will align with the corresponding part positive directions depending on support plane selected.

--Doug

 

[Kristian Mueller]

Thanks, solved.