Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bearing Loads 1

Status
Not open for further replies.
fsison

fsison

Mechanical
Feb 14, 2005
3
0
0
US
Does a bearing load assume a rigid pin in a hole, thus not allowing the hole to collapse in the direction perpendicular to the applied load?

Thanks,
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

pm3000
  • Locked
  • Question
Applying bearing constraints "2"
Replies
0
Views
9
pm3000
pm3000
prym
  • Locked
  • Question
Angular bearing
2
Replies
20
Views
52
PetieSmo
PetieSmo
Paolodm
  • Locked
  • Question
Importing loads from Mechanism
Replies
0
Views
5
Paolodm
Paolodm
slamdfullsize
  • Locked
  • Question
Constraining and Applying Loads in Pro/M
Replies
3
Views
4
Twoballcane
Twoballcane
bengineer04
  • Locked
  • Question
Simulating Bearings
Replies
1
Views
12
seymours2571
seymours2571
Back
Top