Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Best way to Sychronize a Master Model attribute with the Drawing "SH_NUMBER_OF_SHEETS" val

Status
Not open for further replies.
daluigi

daluigi

Industrial
Joined
Apr 17, 2010
Messages
216
Location
BE
NX 7.5 - We'd like to have a part attribute in the Master Model that captures the value of the "SH_NUMBER_OF_SHEETS" attribute in the Drawing, any idea?
The original plan is to use NXOpen API for that if there's no other solution but we would welcome any solution that does not require automation.
 
Status
Not open for further replies.

Similar threads

Asieros
  • Locked
  • Question Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
720
Asieros
Asieros
gurucallie
  • Locked
  • Question Question
Embed an EXcel file into NX 2027 so the file drives a model and stays with the model file
Replies
3
Views
3K
cowski
cowski
BCE75
  • Locked
  • Question Question
Does NX have a way to display layout guides in addition to the grid on a drawing sheet?
Replies
2
Views
1K
BCE75
BCE75
Anton Liubimov
  • Locked
  • Question Question
NxOpen, How to programmatically open a dialog box "Extrude"
Replies
2
Views
825
Anton Liubimov
Anton Liubimov
MANox
  • Locked
  • Question Question
Change tabs bar posiotion to "centered"
Replies
2
Views
459
MANox
MANox

Part and Inventory Search

Sponsor

Back
Top