Esbirinai
Materials
- Aug 4, 2004
- 9
I need to performe a pressure hydraulic test on a reactor vessel which has a diameter of aprox 3 meters and an opening on the top of about 1,5 m diameter long.The pressure test will be 30 bar.
I was thinking of installing a blind straight flange on the opening but i was told that the flange should be spherical (dished).
Is this true? How do I set the thickness for the flange?
Thank you
I was thinking of installing a blind straight flange on the opening but i was told that the flange should be spherical (dished).
Is this true? How do I set the thickness for the flange?
Thank you