Feb 20, 2006 #1 aewillms Specifier/Regulator Feb 20, 2006 1 What ways are there of connecting/securing blockwork built off a steel beam to the beam?
Feb 20, 2006 #2 SperlingPE Structural Dec 27, 2002 591 Headed studs, plates, weldable rebar Upvote 0 Downvote
Feb 21, 2006 #3 apsix Structural Sep 21, 2004 1,358 Spot welding EML (expanded metal lathing) to the top face. Upvote 0 Downvote
Feb 22, 2006 1 #4 MikeE55 Structural Aug 18, 2003 143 If you are using a reinforced wall, I like to specify Erico Lenton half-couplers. The coupler welds to the beam - the reinforcing is threaded into the coupler. Upvote 0 Downvote
If you are using a reinforced wall, I like to specify Erico Lenton half-couplers. The coupler welds to the beam - the reinforcing is threaded into the coupler.
