Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bottom or fly ash to soften cooling tower makeup water

Status
Not open for further replies.

Brian2903

Civil/Environmental
Jun 1, 2006
29
Can I use bottom or fly ash from the coal fire power plant to soften the cooling tower water in order to run high cycles of concentration and lower the cost of dispersant?

 
Replies continue below

Recommended for you

Brian2903:

I have never heard of anyone doing that or even researching that. Where have you read of or heard of any such usage being considered? I would very much like to have that information.

Milton Beychok
(Visit me at www.air-dispersion.com)
.

 
Brian2903:

Besides which how would you ever accomodate the various water soluble fly ash reminants in your cooling tower water???

Not a winning idea!!


Orenda
 
If only 10% of the material in fly ash is lime, that will leave you with the expense of dewatering the rest of fly ash (90%) as sludge solids.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor