Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calculating impedence of an flat rectangular bonding strap

Status
Not open for further replies.
MrSpock

MrSpock

Electrical
May 24, 2001
25
US
What is the proper way to calculate the impedance of a flat rectangular bonding strap
 
Replies continue below

Recommended for you

Sort by date Sort by votes
it depends on the frequency range being considered.there is some very good work on this subject in the Bell System Tech. J. going back to the twenties...
 
Upvote 0 Downvote
The best and reliable way to find the empedance of any three dimensional object is to simulate them in 3D simulators like HFSS, CST and KCC (depending on frequency of course.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Joey19
  • Locked
  • Question
Visual understanding of EM fields within a rectangular metal container
Replies
2
Views
31
khiggler
khiggler
jinxnao
  • Locked
  • Question
Low Orbit Satellites and Electronic Control
Replies
1
Views
25
VEBill
VEBill
zackus
  • Locked
  • Question
Problem: S11 of LCR circuit through directional coupler
Replies
0
Views
13
zackus
zackus
enginesrus
  • Locked
  • Question
smartmeter antenna ?
Replies
2
Views
29
Comcokid
Comcokid
simo8989
  • Locked
  • Question
A good source of information on Varactor diodes and Varactor frequency multipliers
Replies
2
Views
19
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top