Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cannot delete layer...

Status
Not open for further replies.

topraka

Mechanical
Oct 17, 2013
14
US
On one of my drawings, I ended up with two dots that I cannot delete.

I had to move everything except these tiny dots to a new layer, and hid and made it unprintable.

When I try to delete the old layer with dots, it shows it being in use and says it cannot be deleted.

The dots, by the way are no longer selectable...

How can I get rid of this layer?

Al
 
Replies continue below

Recommended for you

I was able to delete the dots.

The layer is still there, though.
 
How did you delete the dots, I've had the same problem of dots that I can't select to erase.
 
I have found two methods for selecting the dots.

1. Use the command SMARTSELECT then follow these steps
Apply to: Entire drawing
Entity: Circle
Property: Radius or Diameter
Operator: = Equals
Value: 0
Selection results : Add to Selection Set
And press OK

2. You can select them by means of selecting everything with Ctrl A and then deselecting the items that you want to keep. Once you deselect the items that you want to keep, you are left with the dots which are now selected.

Now that they are selected they are also able to be deleted.

To avoid the zero radius circle(s) in the first place, keep TANGENT esnap turned off except when you are specifically working with circles and tangential lines.

A more indepth description can be found in this link at the Draftsight blog if you have an account.
 
Ericsonbirdman, your method won't work in my case. Something is different these dots. I cannot select them.

If I select all, they still show as unselected.

tr1ntx, here is what seems to work: I moved everything to a new layer, making sure the dots are not moved.

I lock all the layers except the layer the dots are on. Then I made all the layers invisible except the one the dots are on.

I selected all as Ericsonbirdman described, and deleted them all.

When I turned the layers back again. No more dots!

Al
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top