CATIA V5 kinematics of Angular adjustment of two coaxial cams

[Arun_Gopala]

I saw a video in the youtube, link is here

https://www.youtube.com/watch?v=lGFk5ZYygsc,Can

any one explain how this mechanism is simulated in CATIA V5 Kinematics. I created couple of revolute joints and a screw joint its not working. Any help is highly appreciated.

.The stp files can be downloaded from the below link

http://www.mediafire.com/file/u75avfsv5p60p75/Angle2CamSTEP.zip/file

 

[LWolf]

I removed the parts not present in the mechanism.
As a first step, I tried to constrain the assembly, observing the degrees of freedom... once I got the assembly to manipulate-with-respect-to-the-constraints the way I wanted, I proceeded with kinematics
planar; faces towards the shaft
prismatic; top faces & corresponding edges


regards,
LWolf

 

[Arun_Gopala]

Awesome, Thank you so much. Very much appreciate it.

Regards
Arun