Oct 8, 2009 #1 gnagna Automotive Oct 7, 2009 1 Hello I would drive the color of my solids within a part families Can you help me
Oct 8, 2009 #2 JohnRBaker Mechanical Jun 1, 2006 35,757 The only approach for 'parametric' color is to use KF (Knowledge Fusion) routines. John R. Baker, P.E. Product 'Evangelist' Product Design Solutions Siemens PLM Software Inc. Industry Sector Cypress, CA http://www.siemens.com/plmhttp://www.plmworld.org/museum/ To an Engineer, the glass is twice as big as it needs to be. Upvote 0 Downvote
The only approach for 'parametric' color is to use KF (Knowledge Fusion) routines. John R. Baker, P.E. Product 'Evangelist' Product Design Solutions Siemens PLM Software Inc. Industry Sector Cypress, CA http://www.siemens.com/plmhttp://www.plmworld.org/museum/ To an Engineer, the glass is twice as big as it needs to be.
Oct 8, 2009 #3 phillpd Mechanical Oct 19, 2006 780 It might be considered long winded, but you can always selectively build the members. Set the color of the solid and build specific members, then change the color and build others, and so on. Specialty Engineered Automation (SEA) http://www.sea4ug.coma UGS Foundation Partner Upvote 0 Downvote
It might be considered long winded, but you can always selectively build the members. Set the color of the solid and build specific members, then change the color and build others, and so on. Specialty Engineered Automation (SEA) http://www.sea4ug.coma UGS Foundation Partner
