Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Chemical Dosing

Status
Not open for further replies.

redgreen

Civil/Environmental
Jan 19, 2001
9
0
0
CA
Could someone direct me to a good reference (on the net) for calculating concentrations of solutions/slurries. For example if you are to add 5%(by weight) of lime to water, is there a way to calculate the resulting concentration of lime in the slurry/solution without actually taking field measurements?
 
Replies continue below

Recommended for you

I have a ground water bore that has a high concentration of iron (40ppm) Manganese 2ppm Magnesium 10ppm and H2S. With pH adjustment and aeration I can get the majority of the contaminents out.

I am looking for various methods of removing the flock with a continuos feed period of approx 12-14hrs. 100,000 litres required per 24 hrs

I have been informed that the use of upflow clarifiers can have problems with temperature differential.

I will utilse the water in a fish farm and the minimal use of chemicals is of desire.

Thanks
 
Status
Not open for further replies.
Back
Top