Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

choke and kill hose

Status
Not open for further replies.

8146810005

Industrial
Nov 28, 2012
3
Any suggestions to design a choke and kill hose of 3 1/16 inch and 10000 psi rated working pressure.
Please advice......
 
Replies continue below

Recommended for you

I have the feeling, from a Google search, that it's not easy. The articles I scanned frequently started off with "over a year's worth of design and testing ..."

This site gives some standards that might help you if you want to invest that year:
A search of your own might be worthwhile.
 
several manufacturers produce such a hose - Contitech Beattie, Wellstream, and CoFlexip come to mind immediately.

 
Thanks Rickts.
But i am looking for design procedure to develop such hose.i am new to this industry.
Please advice if somebody knows about this.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor