Chrysler Welding Bolts - Projection Welding Standard ? 2

[richards49323]

Greetings, I have Chrysler Process Standard for welding nuts but not for welding bolts.

I have 2 stampings (1.5mm thick) that I am welding a M6x1 weld bolt in. Need guidance on push-off capabilities.

Thanks,

richards49323

 

[TVP]

Chrysler Process Standard PS-1791 WELD SCREWS - PROJECTION WELDING. For M6 in 1.5 mm thick steel, the minimum strength requirement is 10230 N.

 

[richards49323]

Good Morning, Would you by any chance of a copy of this, Chrysler Process Standard PS-1791 WELD SCREWS - PROJECTION WELDING.

I cant seem to locate it.

Thanks again,

richards49323

 

[TVP]

In order to obtain Chrysler standards, you must register with Covisint and have your application approved by Chrysler. Here is the link to the standards login page:

https://essd.extra.chrysler.com/ESSD/Login.jsp