Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Coating on riser

Status
Not open for further replies.

corrosionboy

Petroleum
Apr 4, 2016
1
NO

Hey! I am currently looking for which type of coatings that is best suited for risers. The riser should have a lifetime for 20 years, but they are not used for drilling continuously all those years. They can be stored some months in between as well. Do you guys have some suggestions? Is a metallic coating with a polyester coating on top a possibility? ( Or epoxy with a top coating instead of polyester) The risers is of course exposed for mechanical damages etc... Hope someone has some suggestion! I would appreciate it.

 
Replies continue below

Recommended for you

Please explain a bit more about what this riser is? We may be in a different industry. Your explanation may help me understand what you need.
 
Hey!

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top