Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Compression Index Values

Status
Not open for further replies.

telebegune

Geotechnical
May 13, 2004
1
Typical compression index values?
 
Replies continue below

Recommended for you

What exactly do you mean by compression index value?Check out a soils textbook - aka Terzaghi, Peck and Mesri or Lambe and Whitman.
[cheers]
 
The compression index is estimated by several standard equations. The first is from Terzaghi 0.009(LL-10). The NRCS laboratories developed a good estimate from this equation: Cc = sqrt[0.0032 x LL x (e0-0.4)]. For instance, given a soil with a LL value of 42 and an intial void ratio of 0.76, you would estimate a compression index value of 0.23.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor