Jan 15, 2013 #1 ammsp Mechanical Jan 15, 2013 8 How can I determine the average stress to produce a creep rate of 0,01%/1000hr?? much obliged
Jan 15, 2013 #2 metengr Materials Oct 2, 2003 15,478 You need to obtain either a creep deformation graph (stress versus deformation) or work with creep deformation test data of the specified material. Upvote 0 Downvote
You need to obtain either a creep deformation graph (stress versus deformation) or work with creep deformation test data of the specified material.
Jan 16, 2013 Thread starter #3 ammsp Mechanical Jan 15, 2013 8 Ok, where I can find the creep deformation test data for my material? I´ve been searching for it and only appears data from manufacteurs. How to get a neutral data?? Upvote 0 Downvote
Ok, where I can find the creep deformation test data for my material? I´ve been searching for it and only appears data from manufacteurs. How to get a neutral data??
Jan 17, 2013 #4 metengr Materials Oct 2, 2003 15,478 Check with NIMS or other similar database http://mits.nims.go.jp/index_en.html Upvote 0 Downvote
