Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Curvic coupling 1

Status
Not open for further replies.

borjame

Aerospace
Jun 11, 2002
71
US
Hello all, I'm looking for info on curvic couplings, their shape, standard sizes, how they're cut, load calcs, etc. I've contacted some machining suppliers, would like to get a head start. Any and all info would be appreciated.
 
Replies continue below

Recommended for you

Contact Gleason. They have booklets which explain how to design them (or they used to, cause I've got em). Gleason are the only people who make the machines which are used to make them, as far as I am aware. However, you would probably be better off with a Hirth coupling these days - and they are a lot simpler to design.
 
Hello -how can I help?
I have been working with Curvic Couplings for over 25 years, in production, development and revrse engineering.
Feel free to contact me at TLMauk@yahoo.com and I will help if I can.
 
I have a lot of information on Curvic development, and would be happy to help if I can.

Please contact me at TLMauk@yahoo.com
 
Hi CurvicGuy,

Probably you will prefer Curvic, but I have been told that hirth is even more accurate that curvic and much more cheaper than curvic. I think that in Europe most of machine-tool manufacturers use hirth but in Japan they use Curvic. What is the reason?

Do you know, apart from machine tool, where and who can use hirth couplings?

In hirth, I know Tedisa. I have been told they are very good. . Do you another manufacturer for hirth? and for curvic?

Thank you
 
I do not have much experience with Hirth couplings, but thanks to unclesyd I will be able to increase my knowledge.
Thank you!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top