Nov 22, 2006 #1 klosar Mechanical May 27, 2006 13 Is it possible to visualy cut parts on half in assembly, to make interior of the assembly visible when rendering 3D images? thanks.
Is it possible to visualy cut parts on half in assembly, to make interior of the assembly visible when rendering 3D images? thanks.
Nov 22, 2006 #2 solid7 Mechanical Jun 7, 2005 1,403 Yes, you need one of the DMU products. (can't remember which one - Optimizer, perhaps?) It basically takes a slice, and returns the result in one of several ways, including a volume showing the cutaway of the solid body or assembly. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog Upvote 0 Downvote
Yes, you need one of the DMU products. (can't remember which one - Optimizer, perhaps?) It basically takes a slice, and returns the result in one of several ways, including a volume showing the cutaway of the solid body or assembly. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog
Nov 22, 2006 #3 slcad Automotive Nov 7, 2006 95 Assembly Design workbench Analyze - Sectioning Upvote 0 Downvote
Nov 22, 2006 #5 solid7 Mechanical Jun 7, 2005 1,403 Yes, but that's only temporary visualization. Is that OK? With the DMU product, the section appears in the tree as an application, and you can export your results. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog Upvote 0 Downvote
Yes, but that's only temporary visualization. Is that OK? With the DMU product, the section appears in the tree as an application, and you can export your results. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog
Nov 22, 2006 Thread starter #6 klosar Mechanical May 27, 2006 13 Yes I see now it doesn't work when I try to render image. Also it cuts whole assembly. I've seen 3d images 1/4th cut part in assembly to see the interior in pro engineer. So there is no way to do this in catia? Upvote 0 Downvote
Yes I see now it doesn't work when I try to render image. Also it cuts whole assembly. I've seen 3d images 1/4th cut part in assembly to see the interior in pro engineer. So there is no way to do this in catia?
Nov 22, 2006 #7 solid7 Mechanical Jun 7, 2005 1,403 Again, IF you have the DMU product, you can hid the parts that you don't want to be cut, and then show them after making the section. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog Upvote 0 Downvote
Again, IF you have the DMU product, you can hid the parts that you don't want to be cut, and then show them after making the section. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog
Nov 22, 2006 #8 solid7 Mechanical Jun 7, 2005 1,403 Sorry to not answer the question completely - the only other way is to do a section on the part, itself. Use a 'split' operation. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog Upvote 0 Downvote
Sorry to not answer the question completely - the only other way is to do a section on the part, itself. Use a 'split' operation. ----------------------------------------------------------- Catia Design|Catia Design News|Catia V5 blog
