De-emphasis Settings

[woodfox]

@all

we have changed from NX4 to NX7,
in the customer default we have set "De-emphasis Settings"
to color white and 70%.
But on the the old NX4 parts the color is always blue.
Is there a possibility, to change the color for all old parts automatically?

With thanks in advance!

woodfox

(Please respect'm not a native speaker)

 

[woodfox]

Sorry I’ve found the solution, de-emphasis color is a system setting.
My mistake was that I have stored a test assembly with the wrong color in customer defaults.
All other parts are getting the right color.

Best regards!