In 1979, PCA put out a design manual entitled "Tilt-up Load-Bearing Walls". This was a design aid/Engineering Bulletin.
Very helpful with lots of design tables and theory.
Also, from PCA's "Design Notes on 318-77" there was a good design example on page 22-18 thru 22-37.
Try the following: -
* Tilt up AS 3850-2003
* Design of tiltup conc wall panels CIA (conc inst of Aust) 1992 ISBN 0 909375 46 1
* Tiltup const notes CACA Aust. 1997 ISBN 1 876278 10 2
* Tiltup conc bldgs des & const guide Reinf Conc Council (UK) 1998 ISBN 0 7210 1533 6
* Tiltup & precast conc const for bldgs Worksafe, Western Australia