Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design Spec for OSB

Status
Not open for further replies.
WayNerd1

WayNerd1

Specifier/Regulator
Jun 8, 2007
1
Does anyone know what the "allowable bearing on face, perpendicular to palne of plies" is for OSB? APA has it for plywood (210psi wet, 340 dry, S1,2 & 3), but I cannot seem to find it for OSB. Thanks!
 
Status
Not open for further replies.

Similar threads

TRAK.Structural
  • Question
Foundation design for moving a house
Replies
16
Views
2K
jerseyshore
jerseyshore
sam3990
  • Question
Corbel design for torsion
Replies
3
Views
2K
HTURKAK
HTURKAK
dik
  • Question
Design Load for a Door 2
Replies
10
Views
6K
EngDM
EngDM
TRAK.Structural
  • Question
Lateral Design for Open Porches 1
2
Replies
33
Views
8K
XR250
XR250
mikek396
  • Locked
  • Question
Anchorage Design for Basement Elevator 1
Replies
3
Views
2K
driftLimiter
driftLimiter

Part and Inventory Search

Sponsor

Back
Top Bottom