Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Diffusivity of SO2 in caustic soda solution

Status
Not open for further replies.

grunen

Civil/Environmental
Jul 14, 2005
1
0
0
US
I'm trying to model so2 removal using a tray scrubber. I need to locate the diffusivity of so2 within a caustic solution on a square feet per hour basis.

Does anyone know where to locate diffusivity information for so2?
 
Replies continue below

Recommended for you

I've found an old spreadsheet (SO2 scrubbing with dilute NaOH)where I used Dl=1.18 e-9 m2/s
I do not find where I got this figure. The order of magnitude is OK.
 
Guys
as you are chating about SO2 would like to ask if you can help me with the following:
i´m trying to roast molybdenite and to get molybdenum oxide MoO3 with a minimum sulpher content. But unfrotunately its´comming with a 1.5% of SO2. is the any chemical solution which could remove that rest of the sulpher from molybdenum oxide.
thanks
 
Status
Not open for further replies.
Back
Top