alalani
Materials
- May 7, 2014
- 4
hi guys
I have problem in my project also I don't have time , because I just have two months then I should submit my report my problem is (I’m working on an incremental sheet forming process which needs a rigid tool to move on a complicated tool path, i.e., something like helical path. I have defined this path correctly using AMPLITUDE but it is only work at small number of turn (distance between turn 1 mm) . Otherwise, if I reduce the distance between turns i.e. 0.5 mm I got a very strange tool path not as the same as the one that has been defined using AMPLITUDE. Consequently, the tool moves in arbitrary motion like sliding in random motion.)
If you have any suggestion it will be highly appreciated
I have problem in my project also I don't have time , because I just have two months then I should submit my report my problem is (I’m working on an incremental sheet forming process which needs a rigid tool to move on a complicated tool path, i.e., something like helical path. I have defined this path correctly using AMPLITUDE but it is only work at small number of turn (distance between turn 1 mm) . Otherwise, if I reduce the distance between turns i.e. 0.5 mm I got a very strange tool path not as the same as the one that has been defined using AMPLITUDE. Consequently, the tool moves in arbitrary motion like sliding in random motion.)
If you have any suggestion it will be highly appreciated