Jul 13, 2015 #1 dnweld Industrial Nov 3, 2014 4 Is this 48 inch cap a part I can buy from a manufacturer, is so from whom? If I have to fabricate, how? Material would be ASTM A387 Gr 22 or equivalent.
Is this 48 inch cap a part I can buy from a manufacturer, is so from whom? If I have to fabricate, how? Material would be ASTM A387 Gr 22 or equivalent.
Jul 13, 2015 #2 SnTMan Mechanical Jan 22, 2005 6,793 dnweld, elliptical heads are widely available: https://www.google.com/?gws_rd=ssl#q=2:1+elliptical+heads Cut the center out, weld your cylinder in place. Regards, Mike The problem with sloppy work is that the supply FAR EXCEEDS the demand Upvote 0 Downvote
dnweld, elliptical heads are widely available: https://www.google.com/?gws_rd=ssl#q=2:1+elliptical+heads Cut the center out, weld your cylinder in place. Regards, Mike The problem with sloppy work is that the supply FAR EXCEEDS the demand
