Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IFRs on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

error 734009

Status
Not open for further replies.

thndrcat

Mechanical
Dec 20, 2006
13
Anyone know what this means? It keeps coming up when loading an assembly.
-J
 
Replies continue below

Recommended for you

Does this error comes for every assembly you open or for a specific assembly?
Best Regards
Kapil
 
Those error codes are very low level and only GTAC can help you resolve them.
If the developers can identify why an error occurs, they code as much information into the message as they can. If they can't, you get those 6 digit error codes with no explaination. The only thing you can do is look in theb log file and see what is happening in NX just before the error is triggered.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
Not for every assembly, just this one.
 
Try Part Cleanup.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
ON A COPY OF THE FILE!!!!!!


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor