Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EXTRUDE-----CUT EXTRUDE

Status
Not open for further replies.

SCRUDRIVER

Agricultural
Mar 14, 2008
15
US
This happens on this version SW2008 x64 sp3.0...
When creating a cut at the part level the history tree shows the feature as an extrude with the symbol for a cut-extrude.
When I do the same thing by modifying the part at the assembly level (EDIT COMPONENT)it comes up as a cut-extrude with the cut sextrude feature in the history tree. Not that this is a big deal but thought it was somewhat inconsistent in the history tree. Does this happen to anybody else?



Just a guy in front of a computer banging on the keys
Solidworks 2000 STUDENT EDITION
COMMODORE 64
MOS Technology 6510 @ 1.02 MHz 64KB RAM
VIC-II GRAPHICS CHIP


 
Replies continue below

Recommended for you

I imagine it would happen to everyone else.

At the part level Instant 3D can turn a boss-extrude into a cut-extrude (and vice versa). That is not the case at the assy level. Only cut-extrudes can be performed at the assy level.

[cheers]
 
Gotcha...was just one of those things that baffled me for hours and hours...

Just a guy in front of a computer banging on the keys
Solidworks 2000 STUDENT EDITION
COMMODORE 64
MOS Technology 6510 @ 1.02 MHz 64KB RAM
VIC-II GRAPHICS CHIP


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top