!!!!!!Fasteners!!!!!! - Wheel Studs - Clinch Bolts

[Strut101]

Hello,

I am in need of a fastener information and companies - I am a design engineer looking for a -

"Prees bolt" - Manufacture and catalog
"Clinch Bolt" - Manufacture and catalog
"Knurled Bolt" - "wheel stud" Manufacture and catalog

about 3/8 or 10mm in dia 1 to 2 inches in length.

Basically a good quality "wheel stud". I do not need certified hardware as we are a race car engineering service. The hardware must be off the shelf stuff you know like AN hardware. I have tried the internet and even calling Rosan - Rexnornd - But the companies are to big and hard to get a hold of a person that knows what I am talking about.

Thanks in Advance

AZ

 

[MikeHalloran]

Have you considered ATV wheel studs? Google found a bunch, including these:

http://www.hardkorengineering.com/R...eel studs & nuts&TITLE=M10 x 1.25 wheel studs

Mike Halloran
Pembroke Pines, FL, USA

 

[Strut101]

sorry but no on the atv studs - I need a manufacturer - some company that has a catalog of items inch and metric - Then we can choose standard sizes for our designs and not design a custom fastener that will send accounting in to cardiac arrest.

We are developing several product lines concurently - who manufactures wheel studs?

Thanks

Angelo

 

[patprimmer]

Have you tried ARP

Regards

eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.

 

[GregLocock]

Try Diver Consolidated in Melbourne, Victoria, Australia. They are small and helpful, but also make a lot of OEM fasteners.

Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.

 

[rmw]

Try googling the words < BATCO truck parts > and rummage around among the hits that you get.

rmw

 

[Fabrico]

Go to your local autoparts store and ask to look at a Dorman catalog.